RAID Data Recovery Guide and Tips

If your RAID drive fails, you need to choose a good way to restore data from the drive. RAID configurations are typically performed in such a way as to maintain a balance between device capacity and performance. Therefore, RAID drives require additional disk to maintain parity information. Here are some tips that can help you recover data from your drive and reconfigure RAID.

1. Cituation analysis

First of all, you need to analyze the situation and examine the RAID configurations. In this process, be sure to try to find out which part of your data is inaccessible. Check the RAID card as well. Also, you can use Drive Monitor to check for disks with RAID problems.

2. Go through the factory manual

To restore data from the wrong RAID drive, be sure to read the manufacturer's manual as well. This will help you get a better idea of ​​the technical aspects of the card and the information you need to configure your card.

3. Check the backup

Find out if you can access a backup of the lost files. If a backup is not available, you may need to contact the RAID data recovery service. In the meantime, you do not want to write more data on the drive.

4. Check the RAID card and motherboard

Sometimes, RAID drives are good and the problem is elsewhere. For example, the problem may be with a RAID card or motherboard. To verify, you can send devices to replacement manufacturers. On the other hand, if a RAID card can detect drivers, it is possible that the RAID configuration is good.

5. Do not try the reconstruction process

If RAID does not read drivers, you may consider rebuilding. However, chances are that the attempt will not be fruitful. It is best to avoid making any configuration attempt that may cause further damage. Make sure that the backup is not restored on the same disk.

6. Do not mess with the RAID configuration

It is not good to guess a RAID that includes displacement, stripe, symmetry, or rotation configurations. If you mess something up, you may find it more difficult to recover your data.

7. Contact an expert

Although you can use a good data recovery application to recover your data, it is not recommended for several reasons. By contacting experts, you can rest assured that your data is not lost or ignored.

If you have RAID drivers, be sure to monitor your drives regularly. With data maintenance, you can track how each drive works and whether one is defective. Also, it is necessary to make a backup copy of your files to be on the safe side.

Therefore, if you follow the tips above, you can ensure safe data recovery. In case of doubt, it is always better to communicate with a professional. They will help you recover your data in a few days.

Post a Comment